Removing the Roast Chamber

DISCLAIMER: These video presentations are not intended to be all-inclusive instructional videos nor offer advice on appliance repair. They merely illustrate the process. These videos take a lot for granted such as, but not limited to, safety around electrical devices, proper choice and use of hand tools, techniques to ensure personal safety, protection of property, fire safety, and more. By viewing. listening to, or watching this or any other video on the Hottop USA website you assume all responsibility and release and release Hottop USA and all its employees and contractors from any and all liability. If you do not accept these terms and/or your local laws prohibit such a release of liability, you may not watch or use the information in these videos.

To replace the Roast Chamber:

There is no need to remove the bezel from the roast chamber's inner wall.

It is easier to replace the roast chamber with the bezal attached first, and then replace the chamber's rear wall. There are tabs along the roast chamber's inner wall that must fit into the horizontal frame member.

Once that is in place, secure the two top screws to hold the rear wall to the inner wall. Then the two screws that hold the rear wall to the frame (the first two screws which were removed in the video). Then finish by replacing the remainder of the screws which attach the rear wall to the inner wall.